Parts Used To Build This Antenna

 Brass Sheet Metal 0.016″ X 6″ X 12″ Qty: 2
Need To Cut The Following Circles From The Pieces Of Metal
90mm Circle Qty: 1
68mm Circle Qty: 1
54mm Circle Qty: 1
38mm Circle Qty: 11

Each Circle Will Need To Have A Hole Drilled In The Middle Of The Circle. That Will Fit The All Thread Through. “Please Be Careful”

You Will Need A Piece Of All Thread That Is 18 Inches Or 457mm Long “I Used A 5/16 Inch Or 8mm Dia”.
You Will Need Around 27 Nuts That Will Be Used For The All Thread.

The Following Video Shows More Detail Of How To Make The Antenna